Detailed Product Description
Certification:ISO9001:2000
FE1/10BaseT converter adopts telecom line (E1 or E1 transmitting network,such as PDH, SDH, microwave, etc) to extend Ethernet. It converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it is efficiently and effectively used the spare bandwidth of telecom providers, it saves the networking cost and improve the efficiency and can be used immediately.
Techonology Characteristic:
Realizes Ethernet data transmission of transparence or fraction time-slot in E1 line, bandwidth ranges from 64Kbps-2048Kbps
Support network management function,monitor and set the working status of device
Support Ethernet auto-negotiation and full/half duplex function
Support crossed and through ethernet interface
Support to transmit the ultralong frames regulated by IEEE 802.1Q; support Ethernet switch with VLAN function
Support data frame filter at local side
Provide unbalanced 75Ω and balanced 120Ω E1 interface
To possess the check function and opening conveniently
Interface Parameters:
E1 Port:
Comply with ITU-T G.703,G.704
Code Pattern: HDB3 code
Rate: 2048Kbps±50ppm
Interface: 75Ω BNC and 120Ω RJ45
Ethernet Port:
Comply with IEEE 802.3(2000) standard
Rate: 10Mbps
Interface:RJ45
Network Management Port:
RS232 network management interface,DB9
Working Conditions:
Power Supply :AC 220V±20% , DC -36V~-72V
Power Consumption:<5W
Environment Temperature:0-50
Other Characters:
Dimension:220*175*35mm
Weight:1000g
